H07V-K PVC single core fine wire stranded 1 x 6.0 mm²
Number of cores:
Nominal cross section:
1 x 6.0 mm²
Overall diameter approx:
Net weight approx:
63 kg / km
Standard delivery length:
Conductor DC resistant at 20°C:
3.3 Ohms / km
Current carrying capacity:
These insulated wires are suitable for lying in tubes, under and surface mounting of plasters and also in closed installation conduits.
These are not allowed to install for direct laying on cable trays, channels or tanks. These types are permitted for the inner wiring of equipment, distributor and switchboards and also for protective laying to the lightings with a nominal voltage up to 1000 V alternating current or up to 750 V direct current against earth.
Suitable for installation in electrical installation pipes or similar closed systems - surface or flush mount
International: IEC 60227-2
CCC (China Compulsory Certificate, CCC)
All substances of the cable meet the requirements of RoHS Directive
red, yellow, blue, black, green, green/yellow (other colors can be supplied on request)
bare copper class 5
polyvinyl chloride (PVC) with different colors
No. of strands
Max. overall diameter
63 kg / km
Rated Voltage Uo/U (Um)
450 / 750 V
Maximum current rating Air 25 ℃
Maximum DC resistance, conductor 20°C
3.3 Ω / km
Maximum operating temperature
Short-circuit max. conductor temperature (duration up to 5 S)
- 5 °C to + 70 °C
Minimum bending radius
4 x cable diameter
Recommended maximum tensile stress
50 x A N / mm²
Photographs are not to scale and do not represent detailed images of the respective products.
Prices are net prices without VAT and surcharges. Sale to business customers only.
The information in this document is subject to change without notice.